3.
Grab the rope and insert it through the loop on the top corner of the frame.
4.
Then, repeat steps 2 through 3 for the other side of the projection screen.
5.
Raise up the screen so it stands upright. Grab the end of the rope and tie
it to a stake. Then, stick the stake into the ground behind the projection
screen. (Use a hammer if needed.)
6.
Grab the other end of the rope and tie it to another stake. Then, stick the stake
into the ground in front of the projection screen. (Make sure to place the front
stakes somewhere into the ground where the rope doesn’t block your
view of the screen.)
7.
Check that all four (4) stakes are firmly planted into the ground.
12
