manualshive.com logo in svg

Kodak Prosper S10, Operator'S Manual

Share
Download
Kodak Prosper S10 Operator'S Manual Download Page 29

Operator’s Guide

 29

Chapter 3.   Printer Maintenance

Cleaning

WARNING

Make sure that compressed air does not make contact with skin or eyes. 
Wear safety glasses at all times when compressed air is used. Serious 
injury to personnel can occur.

CAUTION

Clean the filters away from the print station so that the dust does not get 
into the print station.

4.

Clean the filter with one of these procedures:

•

Vacuum the dust.

•

Knock out the dust over a trash container.

•

Rinse out the dust with tap water and fully air dry or dry with 
compressed air.

CAUTION

Do not install a wet filter into the print station. Damage to the print station 
from the water can occur.

5.

Install the clean filter in the bracket.

a.

Make sure the directional arrow on the filter points to the print 
station.

b.

Put the top/bottom or left/right side of the filter into the bracket.

c.

Push up/down or left/right on the filter until the edge slips under a 
bracket.

6.

Close the print station front door.

7.

Do “Turn On the Print Station” on page 15.

Figure 20

Print station air filters

Filters

Top/Bottom
edge

Left/Right
edge

Summary of Contents for Prosper S10








































Reviews:

No comments

Brands by name

Popular brands

Load more brands