14
FAULT
CAUSE
SOLUTION
failure to power up
under-voltage protection
please charge kodak ppS800
abnormal load protection
please remove the loads and
charge, and if the problem can
not be solved, please ask for
repair
product damage
please send back to the dealer/
shop for repair or replacement
charging fault
unmatched charger
please use only the charger
authorized by kodak
charger damage
please contact your local dealer to
replace the charger
abnormal power supply or connection
please re-connect the charger, if
the problem cannot be solved,
please contact your local dealer
to replace the charger
Solar panel charging fault
over current
please use a recommended pV
panel
weak sunlight
please place the solar panel di-
rectly into the sunlight adjusting
location and angle
abnormal wiring-harness connection
please re-connect the wi-
ring-harness. if the problem can
not be solved, please contact
your local dealer to replace the
pV panel.
ac/dc output fault
battery under-voltage protection
please charge kodak ppS800
discharge over-current protection
please check and ensure the po-
wer of loads are within the allo-
wed range. (total loads ~500w)
over temperatue protection
please turn off kodak ppS800
and restart after cooling down
product damage
please send back to the dealer/
shop for repair or replacement
abnormal icon display
abnormal loads
please remove the loads
hardware fault
please send back to the dealer/
shop for repair or replacement
led screen damage
please send back to the dealer/
shop for repair or replacement
led screen fault
led screen damage
please send back to the dealer/
shop for repair or replacement
9. TROUBLESHOOTING
Summary of Contents for PPS800
Page 19: ...19 ...