2
www.kodak.com/go/easysharecenter
ENGLISH
���
Charging the battery
1
Ensure that your camera is running firmware version 1.02 or higher.
Press the Menu button. Press
to highlight the Setup tab. Press
to highlight
About, then press the OK button.
2
If your camera is running a lower version, download and install version 1.02 or
higher from
www.kodak.com/go/m873support
.
3
When your camera is up to date, charge the battery:
NOTE: If the battery charging light does not turn on, ensure:
■
The USB cable is connected to a powered USB port
■
The computer is turned on, and not in sleep mode
For more on USB charging, visit
www.kodak.com/go/USBcharging.
USB / A/V adapter
USB cable (U-8)
Turn
ON
the camera,
then connect then USB cable.
Battery charging
light blinks during
charging, and
turns off when
charging is
complete (approx.
3 hours).
Note: If the battery is exhausted and you are unable to
turn on the camera, charging may take up to 10 hours.
urg_00755.book Page 2 Wednesday, October 24, 2007 1:29 PM