background image

24

A-61818  April  2014 

All sides match

: when turned on, an equal amount will be filled in on 

all sides. This option is only available for 

Black and White

.

Top

: determines how much of the top edge will be filled in. 

Left/Right:

 the option on the left will determine how much of the left 

edge will be filled in and the option on the right will determine how 
much of the right edge will be filled in.

Bottom

: determines how much of the bottom edge will be filled in. 

NOTES:

• The 

Top, Left/Right 

and

 Bottom

 options are not available when 

All 

sides match

 is turned on.

• When using 

Image Edge Fill,

 be careful not to enter a value too 

large as it could fill in image data that you want to keep.

• This option is not applied to the preview image.

Streak Filter 

— allows you to configure the scanner to filter vertical 

streaks from your images. Streaks are lines which may appear on an 
image and are not part of the original document. Streaks may be 
caused by contaminants on your documents (e.g., dirt, dust, or frayed 
edges) or by not following the recommended cleaning procedures for 
your scanner.

On

: turns streak filter on.

Aggressiveness

: allows you to adjust the extent at which the streaks 

are filtered. The values range from 

-2 

to 

2

. The default is 0.

Color Dropout

 — used to eliminate a form's background so that only 

the entered data is included in the electronic image (e.g., remove the 
form’s lines and boxes). For black and white images, these settings 
effect the grayscale version of the document which the scanner 
analyzes to produce that electronic image.

Color

• (

none

)

Multiple

: drops colors other than dark shades (e.g., black or dark 

blue ink)

Predominant

: drops the predominant color

Blue

Green

Red

-

Aggressiveness

: allows you to adjust the extent at which the colors 

are dropped. The values range from 

-10 

to 

10

. The default is 0. This 

option is only available when 

Color 

is set to 

Multiple 

or 

Predominant

.

NOTE:  The 

Color Dropout 

options are only available when the 

Scan as 

selection is 

Black and White.

Summary of Contents for i24x0




















































Reviews: