Copying
59
www.kodak.com/go/aiosupport
Copying a photo
You can copy a photo using the default settings, or you can make adjustments to the
quantity, size, quality, and brightness of your copies.
Using the default settings to copy a photo
The default settings are either the factory default settings (see
Resetting factory
defaults, page 103
), or defaults that you have set on the printer (see Save as
Defaults at the bottom of the table under
Adjusting the settings and copying a
photo, page 60
).
1. Lift the scanner lid, and place the original photo face down in the right front
corner of the scanner glass.
IMPORTANT:
Do not load photos in the Automatic Document Feeder (ADF).
2. Close the scanner lid.
3. Press .
4. Press
to
select
Copy Photo
.
5. Press
.
