Battery Connection for
KEH2700GF / KEH3500GF
All models above use a battery with
side post
as shown in the picture below
Note use battery group 75 with side posts only. Battery size L 9” x W 71/2” x H 71/4”
(Width of battery includes side posts)
Caution: Battery can cause electrical shock or fires please exercise extra care when
attaching the wires to battery.
As picture shows use red wire on the positive post and use black wire on negative post
Attach wires to the battery post using below process:
First
remove plugs on the side post to expose battery terminal holes.
Second
use two 3/8” x 1/2" long screws and two 3/8” nuts to attach wires to the battery
Begin placing the red wire followed by the black wire. The 3/8” nuts are used in the place
of washers to enable firm attachment of the cable wires on the battery.
Third
move the battery into the opening between all thread bolts, while doing this make
sure that wires behind the battery do not get pinched.
Final
use the bracket already installed on two threaded rods, to fasten the battery so that
it is fixed in position.
Side posts
3/8” screw / 3/8” nut
GF
SERIES
2
