79
www.kodak.com/go/support
Troubleshooting
Flash does not fire
■
Check the flash setting and change as needed (
page 16
).
Storage location is
almost or entirely full
■
Transfer pictures and videos to the computer (
page 57
).
■
Delete unwanted pictures and videos, or insert a new SD/MMC
card (
page 11
).
■
Change the image storage location to internal memory by removing
the SD/MMC card.
You cannot take a
picture
■
Slide the Capture/View switch to the Capture
position.
■
Turn the camera off, then on again (
page 4
).
■
Depress the shutter button completely down (
page 12
).
■
Insert a new or charged battery (
page 3
).
■
Wait until the AF framing brackets turn green before attempting to
take another picture (
page 12
).
Cannot locate a
picture
■
Slide the Capture/View switch to the View
position and press
the Menu button to choose an appropriate view option.
■
The picture may have been transferred to EasyShare software
during synchronization, and removed from your camera. Check the
sync & transfer settings in your EasyShare software. Click the Help
button in the Kodak EasyShare software for details.
Slide show does not
run on an external
video device
■
Adjust the camera Video Out setting (see Video Out under
Changing device settings, page 37
).
■
Make sure that the external device settings are correct (see the
device’s user’s guide).
Memory card not
recognized or camera
freezes with card
■
Card may be corrupt. Format card in camera (see Format under
Changing device settings, page 37
).
■
Use another SD/MMC card.
A memory card is
inserted in the Wi-Fi
card slot
■
Using a separate memory card to remove it: with contacts facing
out, insert the card into the Wi-Fi card slot. Gently push the card
against the inserted card to unseat it from the connector. Remove
the card by inverting the camera.
Problem
Possible causes and/or solutions