Troubleshooting
www.kodak.com/go/support
41
Picture quality problems
Status
Solution
Picture is not clear
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the framing marks turn green, press the Shutter
button
completely down
to take the picture.
■
Clean the lens (
see page 45
).
■
Make sure the camera is not in Macro mode if you are more than
27.6 in. (70 cm) from your subject (
see page 31
).
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Use a larger picture size (
see page 29
).
■
If you’re manually adjusting the ISO speed, realize that high ISO
setting may cause grainy pictures (
see page 30
).
Picture is too dark
■
Reposition the camera for more available light.
■
Use Fill flash (
see page 8
) in Program mode, Backlight in SCN mode,
or change your position so light is not behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See
Specifications, page 43
.)
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the framing marks turn green, press the Shutter
button
completely down
to take the picture.
■
In Program mode, increase the Exposure Compensation (
see
page 30
).
Picture is too light
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (
see page 8
).
■
Move so that the distance between you and the subject is within the
effective flash range. (See
Specifications, page 43
.)
■
To automatically set exposure and focus, press the Shutter button
halfway
. When the framing marks turn green, press the Shutter
button
completely down
to take the picture.
■
In Program mode, decrease the Exposure Compensation (
see
page 30
).
