Kodak DirectView CR 800 System Theory Manual Download Page 58

Page: 58 / 68

11–58

12/12/94 – 1234563

[8]

The DUPLEX CAM indexes to Home position #1.

(a)

The SLED moves.250 in. rearward, which moves the CASSETTE into the CASSETTE LOAD STATION.

(b)

The FRONT DRIVE ROLLERS are unpinched.

[9]

The MSC reports the Cassette Ejected status to the MCPU.

[10]

After the Operator removes the CASSETTE from the LOAD STATION, the MSC sends a Scan End status to the MCPU.

Important

The CR 800 will not be able to process another CASSETTE/PLATE until the Scan End status is received.

Communication / Networking and Routing

??Need to get information on this, or maybe there isn’t anything to say that hasn’t already been said. Any comments are appreciated??

Summary of Contents for DirectView CR 800 System





































































Search results

Summary of Contents for DirectView CR 800 System

Reviews:

Related manuals for DirectView CR 800 System

Brands by name

Popular brands

Kodak DirectView CR 800 System, Theory Manual

Search results

Summary of Contents for DirectView CR 800 System

Reviews:

Related manuals for DirectView CR 800 System

Brands by name

Popular brands