Kodak DirectView CR 500 System, User Manual

Page: 99 / 236

August 1, 2003 1F1976 8-1
8
Maintaining Equipment
and Cassettes
Cleaning the CR System Surfaces
Clean the outer surfaces of the CR System only with water using a soft, lint-free
cloth. Dampen the cloth, then wipe the outer surfaces lightly.
CAUTION
:
Do not use alcohol or alcohol-based products to clean the
pinch rollers, belts, entrance guide or any urethane parts on
the CR System.
Cleaning the CRT Screen
Clean the screen regularly to ensure its proper operation:
CAUTION
:
To avoid damage do not use liquid cleaners, abrasive cleaners
or strong solvents, such as benzine, to clean the CRT screen.
Also, do not spray aerosol cleaners directly on the screen.
1.
Turn off the CRT monitor.
2.
Spray glass cleaner on a soft cloth, then gently wipe the CRT screen
viewing surface.
3.
Use a soft cloth dampened with water to clean the housing around the
screen.