Kodak Digital Science DC210, User Manual, Page: 21 / 61

Taking Pictures 3-3
To delete the picture that was just taken without leaving Capture mode, perform the fol-
lowing steps:
1. Set the mode dial to Capture.
2. Turn on the camera.
3. Take a picture.
The picture is displayed on the LCD.
4. Press the button.
The delete screen appears in the LCD.
NOTE: The picture must be showing on the LCD screen to activate the delete screen.
5. Press the or button until the correct delete option is highlighted.
6. Press the Do-It button.
The picture is deleted from the memory card.
To exit, press the or button until NO is highlighted, and then press the Do-It button.
$GMXVWLQJWKH([SRVXUH9DOXH
The camera’s exposure value (EV) can be adjusted from –2.0 to +2.0 EV in 0.5 increments
while in Capture mode. A +1.0 adjustment in EV doubles the amount of light allowed to
reach the charge coupled device (CCD) in your camera. A –1.0 adjustment in EV halves the
amount of light allowed to reach the CCD in your camera.
If your pictures are too dark, increase (+) the exposure compensation setting. If they are
too light, decrease (–) the exposure compensation setting.
&KDQJLQJ([SRVXUH&RPSHQVDWLRQ
To change exposure compensation, perform the following steps:
1. Set the mode dial to Capture.
2. Turn the camera on.
button
button
Do-It button
button
button