Configuring your Camera
May 12, 2004
5-41
Assigning Optimum
Strengths to Lenses in the
User List
Once you determine the optimum strengths for a lens in Photo Desk (see
page 5-40
) and add the lens to the user list, you can assign the strengths to
the lens in the user list.
If you remove the lens from the user list (see
page 5-33
), the new values
are moved to the master list. You can always reset to the default strengths, if
needed (see
page 5-42
). If you delete the lens (see
page 5-37
), the
changes are not saved in the master list.
1. With the appropriate lens mounted and set to infinity, choose Lens
Optimization from the Capture menu, then highlight the lens in the
user list.
2. Press the right side of the Four-way switch to display the Strength
screen.
3. Select the focal length and aperture.
4. Press the right side of the Four-way switch to display boxes where you
can enter the strength determined in Photo Desk.
5. Press the right or left side of the Four-way switch to highlight a box.
Press the top or bottom of the Four-way switch to change a value.
NOTE: The strength must be between zero and 99.
6. Press the OK button.
The assigned strength is applied whenever you capture an image with
the lens selected in the user list.
