48
Camera
Problem
Cause
Solution
Stored pictures are
damaged.
The memory card
was removed when
the memory card
ready light was
blinking.
Make sure the memory card
access light is not blinking
before removing the card.
Pictures remaining
number does not
decrease after taking a
picture.
Image Resolution
and Quality settings
do not take up
sufficient space to
decrease the
picture remaining
number.
The camera is operating
normally. Continue taking
pictures.
Picture is not clear.
The lens is dirty.
Clean the lens (page 65).
Subject or the
camera moved
while the picture
was being taken.
Hold camera steady until the
picture is taken.
The subject is too
far away for the
flash to be effective.
Move so the subject is less than
8.2 ft (2.5 m) away.
