▷
Deletion of all RF cards.
Press “SET” button. (Please refer to “initial operation of set button.”)
Press “SET” button again so that indicator displays “C.dEL.”
To delete, press “Cancel” button.
Tone sound of the deletion of all RF card IDs is heard (once for 60 seconds). When deletion is completed,
tone sound stops.
▷
Lobby Phone ID change (Password setting)
Press “SET” button. (Please refer to “initial operation of set button.”)
Indicator shows “Lb.id.”
Input new password and press “#” to finish password registration (2 digits only).
Registration tone sound is heard.
(System administrator designates system password lest users change lobby phone ID.)
- In case of installing lobbyphone more than 1pcs, each ID of lobbyphone should be resistered differently.
- In order to use monitoring function of lobbyphone which has lobby mornitoring function,
the lobbyphone’s ID should be set as “1”.(This function is available only for KLP-100 series.)
▷
Lobby Phone version check
Press “SET” button. (Please refer to “initial operation of set button.”)
Press “Set” button again so that indicator displays “VER.”
Press “ Cancel” button, indicator displays “02.07”
■
How to set Lobby Phone (initial operation of set button)
Press “SET”button.
Input 4-digit system password (default password:”9999”) and press “#”
- Only up to four ciphers are available for password.
▷
How to change password of lobbyphone.
Press “SET” button. (Please refer to “initial operation of set button.”)
Pressing ‘SET’ button again until ‘Lb.PS.’ sign emerges on display. After pressing ‘Cencel’ button ,
if you input new password and press ‘#’ button, then the password is registered.
ex) When making password ‘9999’ changed into ‘1111’.
▷
Registration of Lobby Phone (KLP-100 series) RF-ID Card (Card Registration)
※
※
optional
Press “SET” button. (Please refer to “initial operation of set button.”)
Press “SET” button again so that indicator displays “RF.id.”
a) Press ‘Cancel’ button , then ‘In’ sign emerges and changes to ‘0’ sign at interval of a second.
At this time, contact the card to lens part. (1 time)
Registration tone sound is heard (twice). Indicator displays “1.”
b) Contact the card to lens part (once).
Registration tone sound is heard. Indicator displays “0002.”
c) Contact the card to lens part (once).
Registration tone sound is heard. Indicator displays “Oh-.”
Registration of a card is completed. -> Completion tone sound is heard (four times).
- In order to register a card, the card should be contacted to lens part total 3 times.
Operational Descriptions
SET
SET
Button Hold Resistered password # button Setting mode
Setting mode Lobbyphone ID setting mode button Existing ID Hold mode Input new ID button
SET
Setting mode Lobbyphone RF setting mode button ID input hold state
Lobbyphone password setting mode button Existing password New password ‘#’ button
RF card delete mode button Deleting card number
SET
Mode identifying lobbyphone version Identified version
