Product Specifications
Wiring Specifications
DC 17V
±
1V (standby: 2W, Operating: 9W),
Common Power Input
DC 12.8 V
±
1V
PROTOCOL DATA TX/RX Method
Hands Free Method (two way)
Calls/images maintains for 30
±
3 seconds after call
Communication with house maintains
for 3 minutes
±
5seconds
METAL ( Zn , Al ) / SILVER
255(W) X 120(H) X 20(D) mm
-10
�
C ~50
�
C
At night, LED at Dial button is automatically turned on
CCD (1/3 Inch )
120
�
0.1 Lux (When IR LED is turned on)
Input Power
Voltage of Internal Operation Power
Lobby Phone’s Data Protocol
Communication MethodAvailable
Time for Call/Image
Exterior Material and Color
Dimensions
Guaranteed Operating Temperature
Automatic LED On/Off
Image Device:
Camera Angle
Minimum Illumination
Lobby Phone
�
C-MIC
Transmits input voices to receiver
- Main Wiring : Voice 1 / Voice 2 / Data : (3-line) polar wiring, over IV 0.8mm applicable
Power(17V/GND) (2-line) polar, over IV 1.2mm applicable
- For Video, coaxial cable is used : 5C-2V
�
Infrared Ray LED : B/W
White LED : Color
Detects and identifies objects at night
�
Camera Lens
Converts recorded images into signals
�
Speaker
Outputs voice signals
�
Set Button
Sets functions of device
�
Cancel Button
Used in canceling calls and
setting functions
�
Call Button
Used in call to house
Camera Angle Controller
Enables users to easily adjust
camera angle by manual
�
Video Amplifier Connector :
(KHU-102P): Composed of connector
for easier connection to Video amplifier (4Pin Wire)
(5V/Signal/ GND/Video)
Dial Button
Numbers are assigned
to call to each house
Reset Button
Resets and returns every
function to default value
Guardroom Call Button
Pressing “0”and “Call”
button in order, guardroom
(KIP-120) is called.
House Main Line Terminals
Adopt terminal type for easier
connection to main house line.
1: 17V
2: GND
3: Voice 1
4: Voice: 2
5: Video
6: Data
7: Door Power
FND indicator
Characters are displayed
when setting or calling to house
�
�
�
�
�
Component’s Name
Precautions for Operation
- Keep away from humidifier and stove.
- High temperature and humidity may cause troubles.
- Do not drop this device and avoid strong impact.
- Keep away from devices generating strong magnetic filed (TV, Speaker, etc.)
(Images can be distorted or blurred as well as mechanical troubles may result.)
- When cleaning, do not use wet hand, volatile benzene or paint thinner.
- Keep image clear by cleaning camera window frequently with soft cloths.
- As this device consists of electronic precision components, do not attempt to disassemble.
■
KVS-104P (Relay) WIRING
90
�
(Pinhole lens)
Same as left
specifications
Same as left
specifications
KLP-100
KLP-P100
KDP-100
for connection
to Doorphone
�
Door Lock dry contact type
8. N.O.
9. COMMON
10. N.C.
�
�
Door open dry contact type
1. If the door opener is the type of ON dry
contact, please connect it to the Terminal
No.8 (N.O.) & 9 (COM.).
2. If the door opener is the type of OFF dry
contact, please connect it to the Terminal
No.9 (COM.) & 10 (N.C.)
3. Additional power supply is necessary in
this connection.
Same as left
specifications
KLP-C100
CCD (1/4 Inch )
97
�
0.1 Lux
(When WHITE
LED is turned on)
A. MAIN LINE (+18V, GND, VOICE1, VOICE2, DATA) OUTPUT
TO MONITOR IN HOUSE 1, 2.
B. MAIN LINE (+18V, GND, VOICE1, VOICE2, DATA) OUTPUT
TO MONITOR IN HOUSE 3, 4.
C. (VIDEO, GND) OUTPUT TO MONITOR IN HOUSE 1, 2.
D. (VIDEO, GND) OUTPUT TO MONITOR IN HOUSE 3, 4.
E. MAIN LINE (5 WIRE) INPUT FROM LOBBY PHONE
(COMMON GATE CAMERA) & (VIDEO, GND) INPUT
FROM KHU-102P.
F. MAIN LINE (5 WIRE) & (VIDEO, GND) OUTPUT TO
THE OTHER KVS-104P IN UPSTAIRS.
