23
22
�
When you press gently the Shutter button
halfway, the focus is set (Auto Focus).
�
Press the above-mentioned shutter a little
harder for about 1 second.
Short-distance Capture (Macro)
●
Is used for a short-distance capture within the range of 0.2m~0.5m.
●
When pressing twice the
button under the LCD monitor, icon
appears and thus short-distance capture is undertaken.
●
If pressing and among the Zoom buttons, TELE mode and WIDE
mode of zoom is set.
T
W
HQ
L
ML
EV
0/3
T
W
T
W
The subject is closer in the ZOOM IN (TELE) status.
The subject is further in the ZOOM OUT (WIDE) status.
I If you set digital zoom in camera setting mode, the subject
will be twice the size with added digital movie effect as well as
3 times larger optical zoom in case of pressing the
Button (Magnified up to 6 times larger).
Button
Button
Digital Zoom
Shutter button
T
◎
Upon a short-distance capture, you cannot use the flash.
◎
Since the images on the View Finder and LCD are different,
you need to take pictures through the LCD monitor.
◎
Upon a short-distance capture, a flash capture may damage
one's eyesight, and the quality of an image may not be good.
When using short-distance capture mode, always take
pictures in the flash prohibition state.
Flash Setting
Flash is required when taking a picture at night, indoors or in the shade.
The distance in which the flash is used is restricted: Wide - 0.5m ~3.0m and
Tele-0.5m~2.0m.
�
Turn on the power of the camera.
�
Select adequate flash mode according to capture condition by pressing the
button. The desired flash mode below should be indicated in the upper
LCD monitor.
�
Flash mode is set as below, whenever the button is pressed:
Flash prohibition ->Night flash ->Auto flash ->Red eye prevention ->
Forced flash -> Flash prohibition
