Press [Guard/Lobby]
button to call
Guard Room.
Instructions for operation
11
10
◆ Visitor call from door camera
◆ To monitor outside of the door using monitor screen
◆ To monitor the lobby using monitor screen :
Press and hold [Guard/Lobby] button for 2 seconds to see lobby image (Image/Incoming voice : 8 second)
Visitor presses Call
button, and call is
forwarded to monitor.
Press [Door/Interphone] button
to display door camera to screen
(View time : 1 minute).
Press [Talk/Menu] button
and the call is connected.
(Talking time : 3 minute)
Call is completed when pressing [Talk/Menu]
button one more time. Pressing [Door Open]
button will open the door and the call is
automatically completed after 5 second.
Monitor speaker rings the
calling sound, and monitor
displays the visitor
(View time : 30 second).
Press [Talk/Menu] button
and the call is connected
(Talking time : 3 minute).
Call is completed when pressing
[Talk/Menu] button one more
time. Pressing [Door Open] button
will open the door and the call
is automatically completed after
5 second.
Hello
Instructions for operation
◆ Internal call & communication
Press and hold
[Door/Interphone] button
for 2 seconds.
MONITOR A
MONITOR B
Additional monitor rings the
calling sound. Press [Talk/Menu]
button to connect the call
(Talking time : 3 minute).
Press [Talk/Menu] button
one more time to complete
the call.
◆ When visitor calls from lobby
Visitor calls the
house to visit by
pressing the house
number from lobby.
Monitor speaker rings the
calling sound, and monitor
displays the visitor
(View time : 30 second).
Press [Talk/Menu] button
and the call is connected
(Talking time : 3 minute).
Call is completed when pressing
[Talk/Menu] button one more
time. Pressing [Door Open] button
will open the lobby door and
the call is automatically completed
after 5 second.
Hello
◆ When call comes from Guard Room
Guard Room calls
the house by pressing
the house number.
Monitor speaker rings the
calling sound, and call is
connected when pressing
[Talk/Menu] button
(Talking time : 3 minute).
Press [Talk/Menu] button
one more time to complete the call.
◆ When make call to Guard Room
Call is connected when
Guard Room answers
the call.
(Talking time : 3 minute)
Press [Guard/Lobby] button
one more time to complete the call.
Definition of Menu Mode Button
UP Button : [Guard/Lobby] Button
DOWN Button : [Door/Interphone] Button
Confirm Button : [Door Open] Button
MENU Setting
To enter to Menu for setting, turn off and on the monitor and immediately in 1 minute push Talk/Menu button for more
than 2 seconds. Press Talk/Menu button shortly one more time to complete the setup.
1. ID Setting :
Pressing <Confirm> button will move to House Number, and House ID can be changed using <UP/DOWN> button.
2. CAM / LB Setting : Need to change setting according to the door camera and lobbyphone model.
3. CAM1 VIEW TIME Setting : Able to set CAM1
’
s VIEW TIME to 1 MIN or 3 MIN.
4. CAM2 VIEW TIME Setting : Able to set CAM2
’
s VIEW TIME to 1 MIN or 3 MIN.
5. MIC : Able to change the MIC volume between levels 1-5 level (audio volume to the receiver).
6. MODE Setting : Identified by OLD and NEW version of interconnected Lobby Phone.
■OLD MODE : Able to set House ID Number up to 1~63, 100~963, 1000~1963, 2000~2963, and 3000~3963.
■NEW MODE: Able to set House ID Number continuously between 1~1599.
7. SYNC Setting : When connecting Lobby Phone it can select the PAL/NTSC spec of the Lobby Phone
8. INIT Setting : Initialize the setting of Menu Setup.
1. ID
2. CAM C60 LB C100
3. CAM1
4. CAM2
5. MIC
6. MODE
7. SYNC
8. INIT
0001
VIEW TIME 1MIN
VIEW TIME 1MIN
3
OLD
PAL
NO
