Program
write
Camera installation
7
6
Installation location
Product connection diagram
■ Monitor installation location
■ Caution of camera installation
∙
Standard monitor installation height
is about 1,500mm where screen
center is at eye level.
In this case, wall-hanging metal
center (center of piping) is 1,450mm
above ground level.
∙
Standard installation height
■ Camera installation location
∙
Camera installation in height Standard
camera installation height is when
lens is about 1,400mm above the floor.
In this case, camera stack center
(piping box) is above 1,390mm above
ground level.
∙
Standard installation in height
∙
Avoid installing camera exposed to direct ray of light (and sun).
∙
Beware backlight and darkness of visitor’s face, which makes identification difficult.
∙
Avoid installing camera in places such as the following picture.
(1) Place illuminating sky as background
(2) Place with white wall reflecting direct ray of light
(3) Place with direct ray of light
1) Remove wall-hanger bracket metal behind monitor.
2) Install wall-hanger bracket metal on 1 type box or wall with attached Vis.
3) Connect wiring to monitor back terminal referring to product connection diagram.
4) Hang monitor on wall-hanging metal, and fix monitor on wall- hanger bracket metal
using attached Vis.
5) Plug monitor’s power plug into consent and check to see if the power switch is [ON]
on the left side of monitor.
■ Directly connecting cut-off power cord with power wire
1) Do not do such electric work on your own. Installing product in this way
requires reliance on electric installation man with electric work license.
2) Insulate with insulating tape while cutting off power cord and connecting with power
wire so electric wire metal does not expose. Contact between exposed electric wires
cause fire or electric shock accident.
3) Such electric work requires connection after interception of supplied power.
※The above angel of view is based on the KC-MC24 camera.
The numbers very according to the type of camera.
■Monitor installation
■Name of each connection port
DC Type
Power cord
ADAPTOR
GND
VOICE 1
VOICE 2
VIDEO INPUT
DATA
PABX
DATA-PABX
VIDEO OUT
Extention Monitor
