/
/
/
Beep~
/
Beep~
Functional Description
7. CCTV Monitoring (3min.)
To change setups from default to long-time mode,
press
▽
button for three seconds
A beep sounds and long-time mode is set. To cancel this mode,
press
▽
button for three seconds once more.
Functional Description
9. Absence mode and Automatic Image Memorizing
To set Absence mode function, press Extension/Absence button in
standby mode. To cancel the function, press the button once more.
If a call is received from door camera when Absence mode
function is set, the device saves as many images as
the number of calls from door camera.
10. Interlocking with PIR Sensor (Infrared Motion Detector) Camera
PIR Sensor
Camera
At the request of a user, PIR sensor camera can be connected to
camera port 2
If a user presses
△
button for three seconds, a setting signal
sounds and set of this function is completed.
Please note that Cam 1 port should be used as door camera, and
CCTV camera or PIR sensor camera should be connected to
CAM 2 port.
or
To cancel PIR sensor camera operation mode,
press
△
button for 3 seconds.
8. Image Memorizing (* KCV-801R, KCV-D801R only) by Manual
Press
△
button with watching images from Cam 1 or 2 to save
as many images as the number of user's pressing the button.
Press Extension Button to end playing the saved images.
Press any of
◁
or
▷
button to view saved images.
(Saved images can be enlarged using Menu button.)
23
22
/
/
/
/
/
/
/
Beep~
or
