13
EN
■
Never immerse the
main unit and the connecting cable in wa-
ter or other liquids and ensure that these components cannot
fall into water or become wet. There is a danger of electric
shock!
■
Do not pour any liquids (e.g. oil or water) directly into the
device or the drawer or place a liquid-fi lled vessel into the
device. It works exclusively with hot air.
■
The device must always be disconnected from the mains
power when it is left unattended and before transporting or
cleaning the device.
■
Do not make any modifi cations to the device. Also do not
replace the connecting cable yourself. If the device, the con-
necting cable or the accessories of the device are damaged,
they must be replaced by the manufacturer, customer service
department or a specialist workshop in order to avoid any
hazards.
■
The device is not designed to be operated with an external
timer or a separate remote control system.
■
Follow the instructions in the “Cleaning and Storage” chapter!
DANGER – Danger of Electric
Shock
■
Use and store the device only in
closed rooms. Do not use the device
in rooms with high humidity.
■
Should the main unit fall into water,
switch off the power supply immedia-
tely. Do not attempt to pull the device
out of the water while it is connected
to the mains power! Have the device
checked by a specialist workshop be-
fore putting it back into operation.
■
Never touch the main unit and the
connecting cable with wet hands
when the device is connected to the
mains power.
■
Make sure that the steam which
emerges does not come into direct
contact with electrical devices and
equipment containing electrical
components.
WARNING – Danger of Fire
■
Do not operate the device in the
vicinity of combustible material. Do
not place any combustible materials
(e.g. cardboard, paper, plastic) on or
in the device.
■
Do not connect the device along with
other consumers (with a high watta-
ge) to a multiple socket in order to
prevent overloading and a possible
short circuit (fi re).
■
Do not use any extension cables.
■
Do not insert anything into the ven-
tilation openings of the device and
make sure that they do not become
clogged.
■
Do not cover the device during
operation in order to prevent it from
catching fi re.
