Operation/Button control
Operating the appliance
Temperature display 30°-100°C
Minus
Plus
Time display 1-120 Minutes and
– – = continuous operation
On/Off
Selector switch
Temperature/Time
Insert plug
Display is lit
Switching on or operating mode
Button: press once:
Switching the appliance on
After switching the appliance on by pressing
the On-Off-button all LCD-segments (liquid
crystal display) are lit for a second.
The temperature that was last set is indicated.
The ciphers of the temperature display blink
when the temperature measured by the boiler
differs from the set temperature (nominal
temperature). Once the set temperature is
reached, the ciphers are constantly lit.
Time: – – = continuous operation mode
Appliance heats up until set temperature is
reached and runs in continuous mode until
‚On/Off’ button is pressed again.
Temperature setting mode
Press ‚Temp/Time’ button once
The temperature symbol (°C) blinks, ciphers
are permanently lit when the set temperature
has not been reached.
Time: – – in continuous operation mode; The
heating goes on working during setting mode
to heat up until set temperature is reached or
set temperature is maintained.
‚Minus’ button
Count down of temperature count down; when
pressing the button shortly, a countdown
number by number is effected until 30°C are
reached (lowest possible temperature setting).
If you keep the button pressed, countdown is
done fast
.
