Kobra Bambou, Operating Instructions Manual

Page: 20 / 64

20
HOW TO USE
- On/Off Dispenser:
Press button “C” once (see Figure 3).
- On/Off Projector:
Press twice (back to back) button “C”.
The project will turn on automatically when turning on the dispenser. If you wish to turn
the projector off, press twice button “C”.
- FIRST INSTALLATION ONLY:
Press and hold button “C” for approximately 20/30 seconds and at the same time place a hand
where the gel is supplied (see Figure 4).
Release button “C” as soon as the hand sanitizing gel is supplied.
This procedure is required when the dispenser is installed to fill up the circuit for the first
time, speeding up the gel supply or in case the gel is not supplied due to empty circuit.
Figure 3
C