14
8. TROUBLESHOOTING
If you have problems with your shredder, check the symptoms described below.
If you are unable to solve the problem this way, contact your nearest KOBRA dealer.
Do not touch the internal parts of the shredder to try to repair it. You could risk serious electrical shock or
mechanical dangers as well as invalidating your guarantee.
PROBLEM
SYMPTOMS
CAUSE
ACTION
The shredder does not start
- led (9) does not come on
-led (15) comes on
- led (16) comes on
-leds come on together
(9-15-16)
-Switch (8) at “0”
-Power cable not
connected
-No electrical power
-Bag full
-Door not closed properly
-Motor in overheating
protection mode
- Turn switch to “1”
- Check plug is properly
inserted into the socket
-Check socket is switched
on
-Empty bag
-Close the door
-Wait 15 minutes for the
motor to cool down
Significant reduction in shredding
capacity
-Capacity reduced
compared with shredding
capacity noted when
cutting knives are oiled
-Cutting knives need to be
lubricated
-Replace the empty oil
container with a full one
-Lubricate the cutting
knives manualy by
inserting several sheets of
paper sprinkled with oil
Summary of Contents for 430TS
