ENGLISH
Placement of the cover strips
Repair of bulge
Spoil fence
WARNING!
The guides are closed with cover strips that MUST not be damaged. The cover strips are essential for the operation of
Amigo®. If a cover strip is damaged it must be replaced before operating Amigo®.
The cover strip may not be removed, bulge out or be exposed to blows or bends of any kind.
To make sure not to damage the cover strips, it is important not to press down on it with fingers or other objects.
When handling the parts with cover strips make sure to pay attention to hand placement to avoid pressing through the cover
strip.
Cleaning
Cover strips must be vacuumed daily. No cleaning agents, compressed air etc. must be used for cleaning.
NB! All cleaning must be carried out while the system is disconnected from the power supply, i.e. powerless.
Bulge on the cover strip.
Repair bulge on the cover strip.
Placement of spoil fence.
If cut out in the spoil fence is larger than 6mm it must
be replaced by original KOBOTS part for precision and
safety reasons.
40 Model 912 Rev. 4
Summary of Contents for AMIGO 912
