OPT
Page 2
OPT K02/0410
1. Contents
1.
Contents ........................................................................................................ 2
2.
Note .............................................................................................................. 2
3.
Instrument Inspection .................................................................................... 3
4.
Regulation Use .............................................................................................. 3
5.
Operating Principle ........................................................................................ 3
6.
Mechanical Connection ................................................................................. 4
6.1.
Process Connection M14 with Nut (OPT-..10) ..................................... 4
6.2.
Process Connection G ½ (OPT-..22) ................................................... 4
7.
Electrical Connection .................................................................................... 5
7.1.
General Information ............................................................................. 5
7.2.
Terminal Connection Diagrams ........................................................... 5
8.
Technical Information .................................................................................... 6
9.
Order Codes ................................................................................................. 7
10.
Dimensions ................................................................................................... 7
11.
Declaration of Conformance ......................................................................... 8
Manufactured and sold by:
Kobold Messring GmbH
Nordring 22-24
D-65719 Hofheim, Germany
Tel.: +49 (0)6192-2990
Fax: +49(0)6192-23398
E-mail: [email protected]
Internet: www.kobold.com
2. Note
Please read these operating instructions before unpacking and putting the unit
into operation. Follow the instructions precisely as described herein.
The devices are only to be used, maintained and serviced by persons familiar
with these operating instructions and in accordance with local regulations
applying to Health & Safety and prevention of accidents.
When used in machines, the measuring unit should be used only when the
machines fulfil the EWG-machine guidelines.
When using the OEM designs (OPT - 0), the electromagnetic compatibility in the
plant must be demonstrated. The sensors themselves are not subjected to any
testing of this type.
