Configuration Set NGM-HART
NGM-HART K05/0922
page 17
5.4.3
Disturbance Signal Scan Status
BASIC CONFIGURATION
• Read out actual disturbance signal scan status by clicking on I21
Field G21 indicates the actual disturbance scan signal status.
00=off, raw echo curve
01=disturbance signal active on top
10=disturbance signal active on top and bottom
• Change actual disturbance signal scan status in field G20 and click on I20 “set
disturbance signal scan status”
• Once changing it to “10” or “01” a disturbance signal scan must be performed
with I22.
Verify changes by clicking again on I21 “get disturbance signal scan status”
