KSM
page 4
KSM K08/0818
4. Operating
Principle
The Plastic Flow Meter model: KSM operates according to the variable area
principle, in which the float is free to move without friction inside the measuring
tube. The reading edge corresponds to the larger diameter of the float. The
standard flow meter is equipped with a scale for water (+20°C), a percentage
scale, O-rings, 2 adjustable set-point indicators and a rail for accessories; on
each end, two threaded cap-screws accommodate various connectors (see
Section 9: Technical Data; Connections). For the operation with bistable reed
switches the float will be supplied with internal magnets.
5. Instrument Inspection
Instruments are inspected before shipping and sent out in perfect condition.
Should damage to a device be visible, we recommend a thorough inspection of
the delivery packaging. In case of damage, please inform your parcel service /
forwarding agent immediately, since they are responsible for damages during
transit.
Scope of delivery:
The standard delivery includes:
Plastic Flow Meter model: KSM
Operating Instructions
6. Mechanical Connection
Before Installation:
Remove all transportation safety locks and ensure that no packing material
remains within the unit.
Be sure that the maximum allowable operating pressure and temperature is
not exceeded (see Technical Data).
Install the flow meter in the piping system, making certain the instrument is
under no mechanical stress/tension (install support bracing if necessary).