Heinrichs Messtechnik GmbH
Operating Manual K09
Page 23 of 28
19
Returning devices for repair and service
Note:
In accordance with the applicable waste disposal legislation, the owner/client is responsible for the disposal of
special waste and hazardous materials. Consequently, all devices sent to Heinrichs Messtechnik for repair must
be free of any hazardous materials. This also applies to possible cavities and fissures in the devices.
If repair is necessary, the above-mentioned requirement is to be confirmed in writing. Please use the form in
section 20.
If hazardous materials remain in or on the device after it has been returned, Heinrichs Messtechnik is
authorized to remove them at the client’s expense without further inquiry.
