Heinrichs Messtechnik GmbH
Page 20 of 28
Operating Manual K09
16
Safety instructions
16.1
Intended use
The K09 variable-area flow meter may be used only for flow measurements of fluid and gaseous media. The
manufacturer shall not be liable for damage which results from improper or unintended use.
When dealing with an aggressive medium, the material durability of all wetted parts is to be clarified.
16.2
Installation, commissioning and operating personnel
Only trained specialists authorized by the system operator may carry out the montage, electrical installations,
commissioning, maintenance and operation. They must have read and understood the operating manual and
follow its instructions.
Always adhere to the conditions and provisions applicable in the country of installation.
17
Packaging, storage and shipment
Take care whilst unpacking the device to avoid damaging it. With the help of the delivery note enclosed in the
packaging, check whether all technically relevant data coincide with your requirements.
Storage and installation must be performed in a clean and dry room to avoid – especially of the interior of the
fitting – contamination.
The boundary values for the ambient temperature are to be adhered to.
When transporting the device to a remote mounting location, we recommend to reuse the factory-issued
packaging and the transport protection.
