Heinrichs Messtechnik GmbH
OPERATING MANUAL TMU-W / UMC4
Page 43 of 118
Operating modes
The UMC4 can be operated in the following modes:
1. Display mode:
In display mode, measured values can be displayed in various
combinations and UMC4 settings can also be displayed. Parameter
settings cannot be changed in this mode. Display mode is the
standard (default) operating mode when the device is powered up.
2.
Programming mode:
In programming mode, UMC4 parameters can be redefined. After
entering the correct password, changes that are permissible for the
customer (customer password) or all functions (service password
for technicians) can be realized.
Operator interface
Functional classes are
displayed as headings
beneath which displays and
parameters are shown in
logical groups.
Beneath this is the menu
level, which lists all measured
value displays or the headings
for their underlying
parameters (parameter
level).
All functional classes are
interlinked horizontally, while
all sub-menus that are
assigned to a functional class
are displayed beneath the
relevant class.
Functional class
Functional class
Function with
numerical Input
Function with
numerical Input
Display
Display
Legend
Numerical Input
153.40
Function
value selected
from list
Function
value selected
from list
Selection
[no]
___________
no
yes
Parameter level
Headline
Main menu
Menu level subpoint
Functionial class
Functionial class
