ZED-Z
page 8
ZED-Z K11/0522
7.2 Function of the control keys
Operating mode >Measure< :
PGM/ENTER
- Press briefly:
a) Display total quantity, then
Display corresponding scale unit or
b) Reset status reports.
- Press for 3 sec:
Switch to operating mode >
Parameterize
<.
▼
- - Press briefly:
Display min. flow value.
- Press for 3 sec:
Enter switching point for Relay S1
s1SPoint
(only if parameter
SPdirect
is set to
“yes”
).
.
▲
- - Press briefly:
Display max. flow value.
- Press for 3 sec:
Enter switching point for Relay S2
s2SPoint
(only when parameter
SPdirect
is switched to
“yes”
).
▼
+
▲
Press for 3 sec:
Sets min. and max. value memory to flow value
(only when parameter
fMMReDir
is switched to
“yes”
).
RESET
- Press for 3 sec:
Sets the part quantity counter to 0.
Summary of Contents for DF ZL Series
Page 1: ...Operating Instructions for Counter Electronic Model ZED Z or DF ZLxxx or Model ExxR ...
Page 10: ...ZED Z page 10 ZED Z K11 0522 7 4 General Settings ...
Page 12: ...ZED Z page 12 ZED Z K11 0522 7 5 Flow analogue output and relay 1 ...
Page 15: ...ZED Z ZED Z K11 0522 page 15 7 6 Relay 2 and volume counter ...