DAG-A44
DAG-A44 K05/0123
page 5
5. Assembly
Please read the
safety advice on page 13
before installation and keep this user
manual for future reference.
1. After removing the fixing elements, insert the device.
2. Check the seal to make sure it fits securely.
3. Click the fixing elements back into place and tighten the clamping screws by
hand. Then use a screwdriver to tighten them another half a turn.
CAUTION!
The torque should not exceed 0.1 Nm!
The dimension symbols can be exchanged before installation via a channel
on the side!
