INDEX
I.- OPERATING SYSTEM
2
II.- REPLACEMENT PROCEDURES
2
III.- TROUBLE SHOOTING CHART
3
IV.- USE WITH OPTIONAL PAPER BAG
3
V.- EXPLODED VIEW SCHEMATI
4
VI.- PARTS LIST
5
I. OPERATING SYSTEM
MODEL
VOLTS
AMPERES
Hz.
DV-100 KG3
127 ~
4 A.
60
DV-110 KG3
127~
4 A.
60
There should be no abnormal noise or vibration, the carbon brushes spark should be small and uniform, and the com-
mutator must have a dark brown and uniform strip.
II.-REPLACEMENT PROCEDURES
1. - TO REPLACE MOTOR
1.1. - Pull release tab outward, at the same time pull cover up.
1.2. - Remove the four screws.
1.3. - Remove the cover.
1.4. - Disconnect the line cord.
1.5. - Remove the motor assy.
1.6. - Replace the motor, reconnect and reassemble.
NOTE: Do not attempt to repair the motor, send for service.
2. - TO REPLACE THE ON-OFF SWITCH
2.1. - Follow steps 1.1 to 1.3.
2.2. - Disconnect the two leads from the switch.
Remove the three screws and remove the cover top, replace the on-off switch, reconnect and reassemble.
3. - TO REPLACE THE LINE CORD
3.1. - Follow steps 1.1 to 1.3.
3.2. - Remove and replace the new line cord and reassemble as initially placed
.
4. - TO REPLACE THE FLOAT
4.1. - Follow step 1.1
4.2. - Remove the cage.
4.3. - Remove and replace the float.
WHEN ORDERING, DO NOT FORGET TO SPECIFY:
PART NUMBER
DESCRIPTION
MODEL NUMBER
NOTE: Drawing numbers are for identification purposes only.
2/ 6 Elaborated July 2013.
