background image

— 30 —

Reviewing Photos and Video Clips

Viewing Pictures in Thumbnail Mode

The THUMBNAIL 

 function allows you to view up to nine images at a time on the

LCD screen.

1

Turn the Mode dial to Playback 

 mode.

The last recorded photo or video clip ap-
pears on the LCD screen.

2

Press the wide angle 

W

 button to view

thumbnail images.

3

The selected image (the image that was
displayed when 

W

 was pressed) is high-

lighted.

4

Use   /   / 

 / 

 to select an image.

5

Press the telephoto 

T

 button to display the selected image in full screen

size.

Zooming the Displayed Image

Magnify a image in Playback mode by zooming in on it from 1.0X to 8.0X.

1.

Turn the Mode dial to Playback 

 mode.

2.

Press 

T

 to magnify the image.

3.

Press 

W

 to zoom out to the original full-sized image.

2003/07/04 09:05

1/6

1.6

1.6

When an image is zoomed in

Playback mode, a scale indicator

appears on the lower left side of

the LCD screen. The zoom factor

is also shown.

1.6

1.6

The scale indicator shows that the

image is displayed at full size.

Summary of Contents for CyperPix E450V























































Reviews: