USER MANUAL CENTRAL HEATING STATION TYPE C32SPV24MEC; C32SPV31MEC
REV.12.06.2017
5 of 18
7
Mounting
7.1
Mounting set
Check whether the mounting set is complete and undamaged – see table 2.
7.2
Dimensions and mounting positions
7.2.1 Installation site
When choosing the installation site, please take into consideration the following safety instructions:
Caution!
Do not install the station in spaces that are
exposed to freezing! In case of freezing the sation can
be damaged.
This equipment can not be installed and used in open
air. Outdoor installation can cause functioning flaws.
Caution!
It is not recommended to install the central heating
station in bathrooms or kitchens or other areas with high
humidity.
The station can be installed only in rooms with
maximum 60% humidity between 20-30°C in order to
prevent the damaging of electronic components.
Caution!
The burning air of the station must not contain
substances such as flourine vapours, chlorine, sulphur,
dissolvants, colorants, adhesives or gasoline. These
substances can lead in time to the corrosion of the
equipment and air/ gas incoming/ outgoing pipes.
Legend:
A – Thermal input connector
B – Hot water output connector
C - Fuel input connector
D - Cold water input connector
E - Thermal output connector
Fig. 1.2 Dimensions and mounting positions
Tab. 2 Mounting set
Pos.
Item
Name
1
1
Station
2
1
Station support
3
1
Bag of small elements - it contains:
- mounting screws 8x80 - 2 items.
4
1
Printed packet – it contains:
- user manual - 1 item
- conformity statement - 1 item
- warranty certificate – 1item
Model
Dimensions (mm)
a
b
c
d
e
f
C32SPV24MEC - HIDR PA66GF30
178
258
168
107
176
306
C32SPV24MEC - HIDR BRASS
178
258
172
90
157
306
C32SPV31MEC - HIDR PA66GF30
218
218
194
129
197
328
3
4
Fig.1.
Fig. 1.2
