Model 7166 Electric Helm
Kobelt Manufacturing Co. Ltd.
Rev A
mnl7166.docx
10 of 17
The operating direction of the potentiometers in relation to the helm wheel is shown below
in Figure 3.
Figure 3: 7166 Potentiometer Direction Diagram
4.3
C
OMMISSIONING
Ensure that the rear cover is installed and secured before powering
on the 7166.
•
Confirm that the electrical connections to the 7166 have been made.
The Functional Test should be carried out while the vessel is still at
dock and before it is taken out to sea after installation has been
completed.
A complete functional test should be performed on the system that the helm has been
installed within before entering operational use.
