HPU100 Hydraulic Power Units
Kobelt Manufacturing Co. Ltd.
Rev C
MNL-HPU100
5 of 32
1.2.2
Notice to Installer
Disregarding the following safety measures can result in an accident causing severe injury to
personnel and damage to material assets.
•
Only use the product as directed in this manual.
•
Never put the product into service if there is evidence of visible damage.
•
Never put the product into service before fully completing installation and
commissioning.
•
Do not carry out any modifications to the product.
•
Only use authentic Kobelt spare parts.
•
Observe all local regulations, directives and laws during the installation of this product.
•
All installation, commissioning, and maintenance work must only be conducted by
qualified personnel. (For the purpose of this manual, qualified personnel are persons
who are familiar with the assembly, installation, commissioning, and operation of the
product and who have the qualifications necessary for their occupation.)
•
Observe all specifications in this manual. If these guidelines are not followed and
damage occurs, the warranty will be voided.
1.2.3
Product Hazards
High Pressure Operation:
This HPU unit generates high pressure
hydraulics. Ensure all power sources are locked out prior to
performing work.
Equipment Starts Automatically:
HPU units are controlled remotely
and may activate suddenly causing bodily harm. Ensure all power
sources are locked out prior to performing work.
Disconnect Power:
Turn off power at distribution panel before
beginning installation to protect installer from electrical hazards.
Voltage and Current Compatibility:
Confirm that the power source
is compatible with the maximum voltage and current ratings of is
product variant. Failure to do so could result in damage or fire.
