KOBELT MANUFACTURING CO. LTD MNL-5027-A.docx (rev B)
20
5.4
R
ECOMMENDED
S
PARES
The spare parts kept on hand will depend on the severity of the service. As a minimum Kobelt
recommends keeping the following parts for each brake in service:
1.
One Lined set of brake shoes
2.
One set of brake pads with rivets
3.
One actuator
4.
Two seal kits
Refer to the parts list drawings in
It is recommended that any required service work on a Kobelt unit be
performed by a factory authorized service representative. Please contact
the nearest Kobelt authorized distributor for assistance.
The table below itemizes which kit/spare part numbers change with the various brake
configuration options. Please reference this table to ensure you receive the correct parts.
Table 6: Configuration Kit Numbers
Configuration Kit Numbers
Actuator Code
Actuator No.
Description
-A
6130
30 sq. in.
-A20
6120
20 sq. in.
Disc Code
Shim Kit
Disc Thickness
-175
5027-1750
1.750 in
-150
5027-1500
1.500 in
-125
5027-1250
1.250 in
-100
5027-1000
1.000 in
Friction Code
Lined Shoe
Friction Material
-N
5027-LSN4
non-sparking
-C
5027-LSC4
low COF (.12-.15)
-E
5027-LSE4
mid COF (.25-.28)
Summary of Contents for 5027-A
