3-33
［
3.10
MACHINE OPERATION
The machine operation procedures described below provide operators with basics which should be learned and
understood, thoroughly. You can further improve your operational skill by throughly learning the performance and
structure of this machine.
3.10.1
PRECAUTIONS OF MACHINE OPERATION
WHEN OPERATING MACHINE
• When starting the machine, check the safety around the machine and sound the horn before starting the
machine.
• Keep the area around the machine clear of people.
• When the control lever is operated during the auto acceleration operation, the engine speed increases abruptly.
Operate the control lever carefully.
• The indications on the monitor do not assure the condition of the devices. Daily maintenance should be
performed not only by seeing the monitor but also by following the procedures described in this manual.
• When abnormality was detected during operation, stop the machine immediately and take proper measures.
• The machine should not be operated until the failure is repaired. Operating the machine with the failure that has
not been repaired may result in a serious accidents.
T
ra ve l motor
Front
Left
Right
Rear
FRONT/REAR AND LEFT/RIGHT OF MACHINE
In this manual, front/rear and left/right are determined by
looking the forward direction from the operator's seat
with the travel motors at the rear side.
Copyright©2020 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S2YY00041ZE03] [0701CsCshWbYs]
