21
Instructions manual |
www.grupotemper.com
KPA 01
Digital clamp multimeter
Safety information
Warning
To reduce the risk of fire, electrical shock, product damage or personal
injury, please follow the safety instructions described in the user manual.
Read the user manuals before using the meter.
This meter has met IEC61010-1 and IEC-61010-2-032 standards with an
overvoltage category of 600V CAT III and a pollution degree of 2. Follow safe
operation procedures to ensure the long life and safe use of this instrument.
Preparation
• When using the meter, follow the following safety rules:
- Take precautions to prevent electrical shock
- Do not misuse the instrument
• Check the meter and accessories thoroughly before using.
• Check to see if the meter or any components were damaged during
shipment.
• Inspect test leads and probes for cracks, breaks or crazes on the insulation
before using the meter.
• Use test leads provided with the unit. If necessary, replace test leads with
identical specifications.
Usage
• Turn the rotary switch to the required function and range to be measured.
• Never use the meter to measure voltages that might exceed 600V DC/AC
above earth ground.
• Always be careful when working with voltages above 60V DC or 30V AC
RMS. Keep fingers behind the probe barriers while measuring.
• The
“ “
symbol next to the input lead shows that the input voltage or
current should not exceed the specified value in order to protect the
internal circuit from damage.
• Choose the highest range when the value to be measured is unknown.
• Remove test leads before switching functions on the rotary switch.
• Do not perform resistance, capacitance, diode and continuity
measurements on powered circuits.
