54
Clamp meter
55
2.6 Terminals
See Table 3 indicated for information about the terminals.
Table 3. Terminals
Terminal
Description
COM
Terminal receiving the black test lead as a common reference.
V
Terminal receiving the red test lead for voltage, resistance, diode and
continuity measurements.
ºC
Terminal receiving the red test lead for Temperature measurements.
2.7 Accessories
Delivered with the Digital clamp meter:
- User’s manual.................................One piece
- Test leads .......................................One set
- Carrying bag....................................One piece
- “K” type Thermocouple ....................One piece
3. FUNCTION DESCRIPTION
3.1 General Functions
3.1.1 DATA HOLD mode
Data Hold mode makes the meter stop updating the display. Data Hold function can be
cancelled by changing the measurement mode or push key again.
To enter and exit the Data Hold mode:
1. Press key (short press). Fixes the display on the current value, “ ” is displayed.
2. A second short press returns the meter to normal mode.
3.1.2 Battery Saver
The Meter enters the “sleep mode” and blanks the display if the Meter is on but not used
for 15 minutes.
Press the YELLOW key or rotate the rotary switch to wake the meter up.
To disable the Sleep mode, hold down the key while turning the meter on.
3.2 Measurement Functions
- If the current under measurement is higher than the selected value for a long period,
overheating may take place, compromising the safety and operation of inner circuits.
- Do not measure currents on high-voltage conductors (>600V) to avoid risks of discharge
and/or incorrect readings.