kobalttools.com
13
CARE AND MAINTENANCE
TROUBLESHOOTING
If you have any questions regarding this product, please call customer service at
1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday.
CAUTION
•
If the proper care and maintenance is not followed with this tool, there is a potential hazard that
will result in property damage, serious injury and/or death. Always disconnect the tool from the
air compressor before maintenance/service, adjusting, clearing jams, reloading, and when it is
.
STORAGE
•
TOOL MUST BE WELL CLEANED AND MAINTENANCE INSTRUCTIONS FOLLOWED PRIOR
TO STORAGE. STORE IN A DRY, SAFE PLACE OUT OF THE REACH OF CHILDREN.
•
For long term storage, always add 6 to 8 drops of pneumatic tool oil (not included) to the
air inlet. Allow tool to stand upright so that the pneumatic tool oil can lubricate the internal
components of the 3-in-1 nailer properly.
MAINTENANCE
REQUIRED
DESCRIPTION
TOOLS OR
MATERIALS
REQUIRED
MAXIMUM
SERVICE INTERVAL
Each
Use or
Every
2 Hrs
As
Needed
Replace worn or
broken parts
X
Lubrication
See above
lubrication
guidelines
Pneumatic
tool oil
X
PROBLEM
POSSIBLE CAUSES
CORRECTIVE ACTION
Air leakage near the
bottom of the tool.
1. Screws are loose.
1.Tighten the screws.
Air leakage between
the body and the
cylinder cap.
1. Screws are loose.
1. Tighten the screws.
The fasteners are
being driven too
deep.
1. The bumper is worn.
2. The air pressure is too high.
1. Replace the bumper.
2. Adjust the air pressure.
