9
REPAIR INSTRUCTIONS
8
9
10
11
12
6
7
4. Mount the nozzle set:
a. Screw on paint nozzle (See Fig. 8)
b. Attach the air cap w/ring (See Fig. 9)
c. Put on paint needle (See Fig. 10)
d. Attach the needle spring (See Fig. 11)
e. Screw on the fluid adjustment knob
(See Fig. 12)
NOTE: Test spray pattern before use again.
During normal use, the air cap wings are horizontal and the air cap should be pointed up as
shown here (See Fig. 13) This provides a vertical fan-shaped pattern which gives maximum
and even material coverage as the gun is moved back and forth parallel to the surface being
finished.
The air cap wings
are horizontal.
13
