1
2
3
4
5
6
SWITCH ACTUATOR
SAS-04.16
BASIC INFORMATION
The switch actuator receives KNX telegrams and switches up to 4 independent loads. Each output has a bistable
relay, which can be manually controlled.
• 4 independent channels for a maximum capacitive load of 140
µF
• Ability to connect outputs to different phases
• Manual control of outputs using front panel buttons
• LED indication of output status
• Extendet logic and scenario functions for each output
• Ability to select output mode (NO or NC)
• Saving settings during a KNX power failure
• Power supply via KNX bus
• DIN rail 35mm mounting
PASSPORT
МГРЛ-27.12.1931-001.04 ПС
page 1
1. Outputs 2. Output status indicator LED 3. Output control button
4. Programming button 5. Programming LED 6. KNX connector
Module Electronic LLC
module-electronic.ru, [email protected]
phone: +7-495-150-27-25
