OPE-ESYSLR-0338-B
©Knox Company. All Rights Reserved
KNOX ELOCK CORE RETROFIT:
KLS-1500 KNOX HOMEBOX INSTALLATION GUIDE
2
1601 W. DEER VALLEY RD. PHOENIX, AZ 85027 |
T.
800-552-5669 |
F.
623-687-2290 | [email protected] |
KNOXBOX.COM
MECHANICAL LOCK CORE REMOVAL
Disassemble the Mechanical Lock:
Lift the Dust Cover, insert the key, and
open the lock box.
Use a 7/8" socket or wrench to remove the
Lock Shell Nut from the inside of the door.
Remove the Lock Shell, Dust Cover,
and Dust Cover Bracket from the
outside of the door.
Use a 9/16" socket or wrench to
remove the Lock Cam by removing the
Lock Cam Nut and Lock Washer. Put
the Lock Cam and remaining hardware,
aside for later use.
Remove the Lock Core. Pull out the
key along with the Lock Core from the
outside of the door.
1
4
5
2
3
NOTE:
Set all the hardware aside for later use.
IMPORTANT:
Return Lock Shell with the Lock Core and Mechanical Key to
Knox Company. Contact Technical Support for return instructions.
NOTE:
For illustration of part
disassembly, see first page.