PART 1
2) Fit the transverse bar (
14
) between the brackets of the
perforated board. (using 2 pcs
3
screws M6 x 0.39 in)
3) Use the screw M6 x 0.55 in to fix the perforated board
to the frame. (using 3 pcs
1
screws M6 x 0.55 in)
4) Position the left and right support brackets (
16
) and (17)
on the work table corners, (using 4 pcs
3
screws
M6 x 0.39 in)
16
5) Fit a cross bar (
18
) between the two upper support
brackets. (using 4 pcs screws
3
M6 x 0.39 in)
6) Mount the board (
C
) on the top of the frame.
(using 4 pcs trapping screws)
17
PART 2
7) Put the left and right feet (
21
) and (
21
) on a flat surface.
8) Joining the two real legs with a transverse bar (
18
).
(using 4 pcs
3
screws M6 x 0.39 in)
1) Put the right and left brackets (
15
) and (
15
)
of the perforated board on a flat surface
Summary of Contents for KN WB-48
Page 12: ...www knova com mx...