KNOVA KN DP-2000N, Manual

Page: 7 / 40

SYMBOLS
6
Your power tool and its Instruction Manual may contain “WARNING ICONS” (a picture symbol intended to alert you to,
and/or instruct you how to avoid a potentially hazardous condition). Understanding and heeding these symbols will help you
operate your tool better and safer. Shown below are some of the symbols you may see.
SAFETY ALERT:
Precautions that
involve your safety.
WEAR EYE
PROTECTION:
Always wear safety
goggles or safety
glasses with side shields.
WEAR A MASK:
Always wear a
face mask or dust mask.
WEAR HEARING PROTECTION:
To reduce the risk of induced hearing
loss, always wear a hearing protection.
READ AND UNDERSTAND
INSTRUCTION MANUAL:
To reduce the risk of injury, user and all
bystanders must read and understand
instruction manual before using this product.
KEEP HANDS AWAY
FROM BLADE:
Failure to keep your
hands away from the
blade will result in
serious personal injury.
SUPPORT AND
CLAMP WORK
PROHIBITION
CARTON CONTENTS
1) Carefully remove the drill press from the carton. With the help of an assistant, place the head assembly on a secure surface
and examine it carefully.
2) Separate and layout all of the parts. Carefully check them according to the diagram below.
WARNING
If any part is missing or damaged, please do not plug in or use the drill press until replacements have been obtained.
Base
Head assembly
Table assembly
Feed handles
Table lock
handle
Column assembly
Hex bolts
3 mm & 4 mm
hex keys
Self-ejecting
chuck key
Chuck