IMPORTANT
Please read these instructions carefully, note the safety instructions warnings, use the
product correctly and with care for the purpose for which it is intended, failure to do so
may cause damage to property and/or serious personal injury, please keep this
instruction manual safe for future use.
1. SAFETY INSTRUCTIONS AND WARNINGS
1.1 The maximum ram capacity is 10 ton.
DO NOT exceed this rated capacity.
1.2 When extension tubes are used, the
rated capacity is always reduced by
50% for each tube connected.
1.3 The maximum spreader capacity
is 0.5 ton. And maximum ram toe and
plunger toe capacity or 0.8 ton. DO
NOT exceed these rated capacities
when using these attachments.
1.4 Do not use this equipment as a
vehicle lifting device or as a vehicle
support.
1.5 Keep children and other
unauthorized persons away from
work area.
1.6 Remove loose clothing. Remove ties,
watches, rings and other jewelry, and
contain long hair.
1.7 Always wear ANSI approved safety
goggles when operating the repair
kit.
1.8 Keep proper balance and footing. do
not overreach and wear nonslip
footwear.
1.9 Only use this equipment on a surface
that is stable. Level, dry and not
slippery, and capable of sustaining
the load. Keep the surface clean,
tidy and free from unrelated
materials and ensure that there is
adequate lighting.
1.10 DO NOT allow the piston rod (R03)
of ram to extend so far as to exceed
the maximum ram stroke.
1.11 When coupler valves are
disconnected, always use dust cap to
keep the hydraulic system clean.
1.12 DO NOT drop any heavy objects
onto the hose and DO NOT twist the
hose. Always keep the hose clean to
avoid damage to the hose and
couplers.
1.13 Keep the equipment away from
heat or fire, as this may cause
damage or weaken the seals.
1.14 DO NOT operate this equipment
when you are tired and under the
influence of alcohol, drugs or any
intoxicating medication.
1.15 DO NOT allow untrained persons
to operate the equipment and DO
NOT make any modifications to it.
1.16 DO NOT expose the equipment to
rain or any other kind of bad
weather.
1.17 Use a qualified person to maintain
the equipment in good condition.
Keep it clean for best and safest
performance.
1.18 If the equipment need repairing
and/or there are any parts that
need to be replaced, have it repaired
by authorized technicians and only
use the replacement parts supplied
by the manufacturer.
1.19 WARNING: The warnings, cautions,
instructions discussed in the
instruction manual can’t cover all
possible conditions and situation
may occur. It must be understand
by the operator that common sense
and caution are factors which can’t
be built in this product, but must be
supplied by the operator.
2. SPECIFICATIONS
Capacity:
10 Ton.
Pump output pressure:
63 MPa (9,137 psi)
Ram min. height:
12-11/16”
Ram max. height:
17-51/64”
Portable hidraulic equipment 10 Ton.
KN 7402-10PA
Piston stroke:
5-1/8”
Oil being filled:
800 ml.
Net weight:
68.3 lb.
Gross weight:
70.98 lb.
Summary of Contents for KN 7402-10PA
