18
Menu options are grayed out only if the source is selected but no signal is present. For example,
if the projector is set to a video source but the source, such as a DVD player, is turned off video
menu options are grayed out.
Picture Menu
Increasing keystone
To adjust the following settings, highlight the setting,
press
Select
, use the up and down arrows to adjust
the values, then press
Select
to confirm the changes.
Keystone
: adjusts the image vertically and makes a
squarer image. Tilt the projector up or down to adjust
for keystone before using the digital keystone correction
in the menu.
Contrast
: controls the degree of difference between
the lightest and darkest parts of the picture.
Decreasing keystone
Brightness
: changes the intensity of the image.
Color
: adjusts a video image from black and white to fully
saturated color.
Tint
: adjusts the red-green color balance in the image
of NTSC video images. The tint setting applies to
NTSC video sources only.
Aspect Ratio
: Aspect ratio is the ratio of the image width
Aspect ratio
to image height. TV screens are usually 4:3. HDTV and
most DVDs are 16:9. The projectors default is 16:9.
See “Choosing the aspect ratio” on page 8 for more information.
Select Native to see the unmodified input with no resizing by
the projector. Select 16:9 to watch enhanced widescreen
DVDs. Select Letterbox to preserve the 16:9 aspect ratio.
If you have a 16:9 source and screen, the image fills
the screen. If your source is letterboxed, the image is
expanded to fill the screen. Select Natural Wide to
stretch a 4:3 image to fill the entire 16:9 screen.
The center two-thirds of the image is unchanged; the edges of the
image are stretched.
For more information regarding Aspect Ratio, see page 8.
Presets
Presets
: This allows you to customize settings and save
the settings to be restored later. To restore the factory
default settings, choose Factory Reset in the
Settings>Service
menu.
To set a preset for the current source, adjust Save User Settings
the image, select
Save Settings
in the Presets menu,
then choose Save User 1, 2, or 3. You can recall these
settings in the future by selecting the appropriate
user presets. All settings in the Picture menu
(except Keystone) are saved and recalled.
Summary of Contents for HDP410
Page 1: ...HDP410 HDP420 HDP460 1080p DLP Projector Users Manual v1 3...
Page 14: ...14...
